Quantcast
Published on 2019-07-02

Factors that affect home elevator costs in Fort Worth, Texas.

July 2, 2019

Installing a home elevator can significantly improve a person’s quality of life. An elevator helps people with mobility issues navigate around their home more easily. It also reduces the strain of carrying things up and down the stairs, especially for aging homeowners who are at a higher risk for falling accidents.

Installing a home elevator, however, comes with a steep price tag. Here are some of the key factors that affect home elevator costs in Fort Worth.

1. Types of home elevators

The type of elevator you install in your home will primarily dictate the amount of money you have to shell out. Below are the five most common types of home elevators:

  • Pneumatic elevators are powered by a vacuum system within a tube. They don’t require a machine room or a pit, so they can easily be built into an existing home. Compared to the other types of elevators, pneumatic elevators are the most expensive, but they are also the easiest to install.
  • Hydraulic elevators are driven by the principles of hydraulics. They don’t require a machine room, and the controller can easily fit into a cabinet installed on a wall near the elevator. They cost a little less than pneumatic elevators, but installation costs can drive the price up depending on your location.
  • Chain-driven elevators resemble cable-driven elevators, but instead of a cable, they use a chain wrapped around a drum to move the car up or down. Chain-driven elevators cost less than hydraulic elevators but more than cable-driven elevators, especially when they are built into a new home.
  • Cable-driven elevators consist of a car, shaft, counterweights, and a control system. They are very similar to those installed in commercial buildings and often cost less than hydraulic elevators.
  • Traction or machine room-less (MRL) elevators are the least expensive type of home elevators since they don’t require pits that extend into the ground or a machine room. They work by sliding up and down a track through a counterweight.

Consult a reliable and experienced installer like https://nationwideliftsoftx.com to figure out which type is right for your home.

2. Dimensions and features

The size and the features you want to include will also affect the price of your home elevator. The bigger the capacity of the elevator, the more expensive it is going to be. An important thing to remember, however, is that building codes in certain states and countries may provide a limit to the size of the residential elevator that you can safely install.

The following are essential figures that you need to keep in mind:

  • The average size of a hydraulic elevator is 18 sq.ft or less. In order to successfully install one in your home, prepare to allocate an area of 5 sq.ft. Hydraulic elevators are usually concealed behind doors or bookshelves to give the appearance that they have always been a part of your home.
  • Pneumatic elevators, on the other hand, don’t require as much space. For an occupant in a wheelchair, 3×4 ft is usually enough. Pneumatic elevators feature a clear tube that is easily visible anywhere in the house.
  • Decorative paneling, custom doors, and other high-end accessories will drive up the installation costs considerably.

3. Location

If you are still in the process of building a home, you can easily incorporate a home elevator into the construction design. It can be installed virtually anywhere you want. However, if you are planning to install one into an already existing home, there are limitations as to where you can place it.

Here are some vital considerations to remember before proceeding with the installation:

  • Pneumatic elevators are easy to install since they can be placed anywhere – in the middle of a room, against a wall, or even hidden behind a closet.
  • Hydraulic elevators will require more space since they are intended to be concealed or enclosed. You can use areas such as stairwell, closets, or atriums.
  • Most home elevators are specifically designed for two-story homes. If you have a home that has more than two stories, costs will increase per additional stop.

4. Other Factors

In addition to the factors listed above, here are some additional variables that can also affect the total price:

  • Quality of the materials used
  • Complications with the location, such as irregular rises or large steps
  • Construction due diligence and inspection costs, and shipping costs if the elevator is coming from a remote supplier
  • Waterproofing, if the elevator will be installed outside
  • Battery replacement and yearly inspection and maintenance costs

Conclusion

Before you decide to install an elevator in your home, make sure that you are well informed about the factors that can affect its price. You do not want exorbitant surprises when the installation is already in progress.














Top