Conveyor Chain Bearings Work Well After Two Years - Industry Today - Leader in Manufacturing & Industry News
 

March 8, 2022 Conveyor Chain Bearings Work Well After Two Years

A drop-size carrot sorter, with Vesconite plain bearings installed on its conveyor chains, has worked well for two years.

A drop-size carrot sorter.
A drop-size carrot sorter.

The carrot producer installed the bearings on one of its two processing lines to test whether the processing line with Vesconite performed better than the standard processing line.

Since installation, the farm reports that Vesconite bearings on its conveyor chains have reduced wear and resulted in quieter operation.

A drop-size sorter consists of a mainframe with sprockets on each side. A chain runs on the sprockets and a polyethylene plate is attached. Rollers, spaced increasingly further apart, are located on the polyethylene plate and carrots, depending on their size, fall through the differently-spaced rollers into bins below.

Ensuring the smooth operation of the sorting machine, including the bearings on its roller chains, is thus paramount.

Vesconite agricultural application engineer Johan Cronje says: “Farmers are concerned about conveyor chain wear. A break in any one of the steel links means that the entire chain needs replacing.”

Chain replacement can be extremely costly. Besides the cost of the chain, a chain breakage could result in a drop-size sorter being out of operation for a day, with resulting losses in production and processing time.

Quieter operation is also important for health and safety, since workers may be sorting and working near the traditionally-noisy machines, states Cronje.

Contact:
Johan Cronje
+27 11 616 1111
johan.cronje@vesconite.com

 

Subscribe to Industry Today

Read Our Current Issue

Forging the Next 250 Years: Powering the Next Era of American Manufacturing

Most Recent EpisodeBeyond Industry 4.0: Intel’s Ricky Watts on Agentic AI, Physical AI and the Connected Factory

Listen Now

In this episode of Industry Insights, Ricky Watts, General Manager, Industrial and Robotics Division at Intel Corporation, explains why the Industry 4.0 groundwork manufacturers have been laying for years is now the foundation for AI at scale. He describes how IT and OT systems are finally coming together, and how agentic AI can pull data from the plant floor, the supply chain and the C-suite to find out why a production line is underperforming. Watts also covers why chips have become strategic infrastructure, the rise of physical AI and robotics in harsh industrial settings, and the skills tomorrow’s workforce will need. He finishes with a layered approach to cybersecurity in software-defined plants.