Building a Stronger Drone Security Strategy - Industry Today - Leader in Manufacturing & Industry News
 

November 20, 2026 Building a Stronger Drone Security Strategy

Critical infrastructure operators can address drone threats with layered detection, shared situational awareness, and tested response plans.

security solutions
Integrated security solutions help utility operators protect critical assets, monitor facility activity and strengthen situational awareness.

By Joe Morgan, Segment Development Manager, Critical Infrastructure, Axis Communications

Between April and June 2026, the Federal Aviation Administration logged 601 drone sightings near U.S. airports, nearly double the previous quarter. The agency routinely receives more than 100 such reports each month. These figures do not prove malicious intent or measure activity across critical infrastructure sites, but they illustrate how difficult it can be to distinguish a hobbyist from a threat. For operators of energy facilities and data centers, that creates a growing security challenge.

What a drone can see

Drones create risk that goes far beyond any payload they may carry. A drone can photograph equipment, map a location’s layout, and reveal the timing of shift changes without ever crossing a fenceline. A single pass tells an observer very little, but repeated activity can reveal much more. A drone that circles a substation at the same time every morning, for example, may provide its operator with significant insight into facility operations. Over time, those observations can help someone identify patterns or potential vulnerabilities.

None of this means every drone is a threat. Contractors, commercial operators, and hobbyists all have reasons to fly drones in a wide range of locations. The real task for security teams is separating routine activity from behavior worth investigating. Context matters: a drone repeatedly detected in a restricted area at different times of day may warrant closer attention. So may a drone that remains stationary or hovers over a sensitive area, potentially observing activity below.

The way a drone moves can also provide clues. If it approaches a specific location, hovers for about a minute, and then retreats, operators may want to investigate possible drop activity, such as an object being left on the rooftop of a data center. The significance depends on what is directly below the drone and how long it remains there. Multiple drones exhibiting similar behavior could indicate a larger-scale event, such as a swarm. None of these behaviors alone confirm malicious intent, but each can help determine when further investigation is warranted.

Looking up

Getting that context means extending security into the airspace. Fences, gates, and ground-level cameras show operators who is approaching a facility, but they weren’t built to watch the sky. A good starting point is to map the site, noting where the critical assets are and what approaches a drone could take. Panoramic cameras can then cover wide areas, while pan-tilt-zoom (PTZ) cameras placed near high-value assets provide a closer look at locations where potential drone activity would be the most suspicious or unwelcome.

Each option has limits. Wide-angle cameras struggle to identify small objects at a distance, and image distortion can obscure what’s happening. Video analytics can flag objects of interest, but how well they perform depends on camera placement, the environment, and the size and speed of what they’re tracking. Operators should test them on their own sites rather than rely on specifications alone.

Layering detection

Because every tool has gaps, it’s important to implement a layered approach to security rather than relying on individual solutions. Radar can detect and track objects in the airspace and cue cameras toward them. From there, wide-angle cameras provide context, PTZ cameras let operators zoom in to verify, and thermal cameras add visibility in low light. AI-enabled analytics ease the burden of watching multiple feeds at once.

The payoff comes when these tools feed a centralized video management system (VMS). An operator receives an alert, pulls up the relevant camera views, and assesses the activity without switching between platforms, which shortens the path from detection to decision. The Congressional Budget Office reached a similar conclusion in a July 2026 assessment of military installations. Layered detection and defense systems offset one another’s limitations. For a critical infrastructure operator, the right mix to address the drone challenge depends on the size of the site, the terrain around it, and the likely flight paths.

Planning the response

A quick notification is only useful if someone knows what to do next. Teams need to define who reviews an alert, who verifies it, and who decides whether to escalate to facility leadership or law enforcement. Those procedures should also allow for the drone that is flying lawfully and for alerts that turn out to be false.

The legal line matters most at this stage. Observing a drone is not the same as interfering with it. Jamming or taking control of an aircraft raises serious legal and safety issues, and authority to use those measures is limited. Operators should understand the applicable federal, state, and local requirements and work with the appropriate authorities rather than try to disable a drone themselves. Regular drills help here, because they show how alerts travel, who makes the call, and how information reaches outside responders before a real event puts the plan to the test.

Starting with the assets

All of this depends on the site. Terrain, nearby buildings, air traffic, and the assets being protected shape what works, and they can create blind spots that affect how well detection tools perform. The best place to begin is with the most critical assets and the points where drone activity would do the most damage. From there, operators can review current camera coverage, find the gaps, and decide how detection tools should work together. That keeps spending tied to real vulnerabilities rather than extra equipment.

Drones will keep getting more capable and finding new use cases. Operators don’t need to treat each one as an attack, but they do need to know what’s overhead and what to do when something looks wrong. Drone security takes more than spotting an aircraft. It takes awareness of the airspace, integrated technology, trained people, and a response plan that has been tested.

joe morgan axis communications

About the Author:
Joe Morgan is the Business Development Manager for Critical Infrastructure at Axis Communications, Inc. In this capacity, he is responsible for developing strategies and building channel relationships to expand Axis’ presence in markets specific to Critical Infrastructure in North America. Mr. Morgan has more than 32 years of experience building market share in the critical infrastructure industry. He has completed course work to become specialized in Optical Imaging and through previous experience and additional coursework has also become specialized in Optical Security. Prior to joining Axis in 2017, Mr. Morgan held previous positions serving in a business development and sales capacity at FLIR Systems, Olympus Industrial and Everest/VIT where he helped deliver new technology to emerging markets. Mr. Morgan focuses on thermal imaging specifically on petrochemical and oil and gas markets. Mr. Morgan has his CFATS certification and is an active member of ASIS. He holds a B.A. in education from the University of Texas at Arlington.

 

Subscribe to Industry Today

Read Our Current Issue

Forging the Next 250 Years: Powering the Next Era of American Manufacturing

Most Recent EpisodeBeyond Industry 4.0: Intel’s Ricky Watts on Agentic AI, Physical AI and the Connected Factory

Listen Now

In this episode of Industry Insights, Ricky Watts, General Manager, Industrial and Robotics Division at Intel Corporation, explains why the Industry 4.0 groundwork manufacturers have been laying for years is now the foundation for AI at scale. He describes how IT and OT systems are finally coming together, and how agentic AI can pull data from the plant floor, the supply chain and the C-suite to find out why a production line is underperforming. Watts also covers why chips have become strategic infrastructure, the rise of physical AI and robotics in harsh industrial settings, and the skills tomorrow’s workforce will need. He finishes with a layered approach to cybersecurity in software-defined plants.